Fix RNDISMP6.SYS Blue Screen Error BSOD in Windows 10 or 11

Blue Screen of Death with crashes is a fatal and generic problem in Windows that makes a System inoperable. One such issue is What failed: RNDISMP6.SYS appearing with a bug check code or stop error. This error is most commonly accompanied by BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL, Kernel_Security_Check_Failure, and System Service Exception.

RNDISMP6.SYS BSOD usually occurs when running internet on a PC through USB tethering with a phone. Root cause of this issue is outdated driver of the USB or other peripherals like keyboard connected to your computer, corrupted system files, and malware.

RNDISMP6.SYS BSOD or Blue Screen Error in Windows 11 or 10

Here is how to fix RNDISMP6.SYS Blue Screen Error BSOD in Windows 10 or 11 –

Way-1: Run SFC, DISM, and dll registration commands at a time

Rndismp6.sys is a kernel file to contribute during running USB Tethering network on Windows. Full name of Rndismp6.sys is Remote NDIS Miniport but the file might create issues due to corrupted system files and outdated or incompatible driver.

This Blue Screen is also likely to occur when hard disk or Windows image is faulty or necessary DLL files are de-registered. But you can repair all these 3 reasons at a time by following the steps –

1. Press Windows+Q.
2. Type cmd.exe.
3. Right click on Command Prompt.
4. Select Run as administrator.
5. If there is a User account control dialog, click Yes.
6. Copy the below command –

sfc /scannow
DISM /Online /Cleanup-Image /RestoreHealth
for %i in (%windir%\\system32\\*.dll) do regsvr32.exe /s %i
chkdsk C: /f

1. Paste into the command prompt, hit the Enter Key, and allow the cmd command to complete its process.
2. Restart the system to see if the BSOD What failed: RNDISMP6.SYS is fixed.

Way-2: Use PowerShell Script

System crash during this issue occurs when you tether a cell phone USB (OnePlus or other)  to your laptop or desktop to connect to network. The internet may be connected but after a while, the stop errors start appearing with bug check codes.

Sometimes, RNDISMP6.SYS may stay on a blue screen, but for many, the computer restarts frequently and stuck in a reboot loop. However, a matter of pleasure is that it can be solved with Registry modifications. So, follow the steps –

1. Press Windows and R keys.
2. Type – cmd.
3. Now press Ctrl + Shift + Enter.
4. A user account control will show up; click on Yes.
5. When Command prompt appears type the following syntax and hit ‘Enter’ –

sc.exe config netsetupsvc start=disabled

6. This will disable Network Setup Service.
7. To open PowerShell, click on Start.
8. Type PowerShell.
9. Right-click on the correct result and select Run as administrator.
10. Confirm the UAC prompt by selecting ‘Yes’.
11. Copy the below script –

$ErrorActionPreference = 'SilentlyContinue'
$path = Get-ChildItem -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}' | Get-ItemProperty | Where-Object { $_.DriverDesc -like "*NDIS*" } | Select-Object -ExpandProperty PSPath
New-ItemProperty -Name *IfType -Value 6 -LiteralPath $path -Force
New-ItemProperty -Name *MediaType -Value 0 -LiteralPath $path -Force
New-ItemProperty -Name *PhysicalMediaType -Value 14 -LiteralPath $path -Force

12. Paste into the PowerShell and hit “Enter”.
13. Again go to the Command prompt and copy-paste –

sc.exe config netsetupsvc start=demand

14. Press Enter and close the command prompt.
15. Restart the computer and check if the RNDISMP6.SYS is fixed.
16. If you don’t want to run the PowerShell cmdlet manually then simply download this file – BSOD_Fixer.zip.
17. Extract it and right-click on BSOD_Fixer.ps1.
18. Select – Run with PowerShell.
19. Remember to enable Network Setup Service before running this script and disable the same at last.

See what is causing the issue using – How to Use BlueScreenView to Detect the Cause of Blue Screen.

Way-3: Modify Registry to fix RNDISMP6.SYS Driver Irql Not Less Or Equal

The above method can be applied manually through Registry Editor and services tool. For this, you just need to disable NetSetupSvc and modify some entries to fix Driver Irql Not Less Or Equal RNDISMP6.SYS BSOD in Windows 11 or 10. So go with the below method –

1. Click on Search.
2. Type – services.msc.
3. Press Enter and allow the Services window to load.
4. Right-click on Network Setup Service and select Stop. In brief, this service is called NetSetupSvc.
5. Click on Search.
6. Type regedit.
7. When a UAC pop-up comes, click on Yes.
8. On Registry Editor, go to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}

9. Find an entry with Remote NDIS-based Internet Sharing Device as DriverDesc.
10. Right-click on the right pane and select DWORD > New (32-bit) Value.
11. Name it *IfType.
12. In the same way, create 2 more DWORD successively and name them *MediaType and *PhysicalMediaType.
13. Double-click on the Values and change their value data as *IfType – 6, *MediaType – 0, *PhysicalMediaType – e.
14. Now go to the Services window and Start the Network Setup Service.
15. Reboot your PC and the error should be fixed.

Check what caused this problem using – WhoCrashed: A Tool to analyze Dump and reveal culprit driver on Windows.

Way-4: Update the device driver

It is fairly clear that RNDISMP6.SYS Blue Screen error is generated because of obsolete device driver. But don’t worry. However, you can update the same using the knowledge in this guide – How to update drivers in Windows 11 (Best ways).

Furthermore. Device Manager, the built-in Windows too will help you to update them in easy mode so move forward with the steps –

1. Press Winkey+R.
2. Type – devmgmt.msc.
3. Hit Enter to launch – Device Manager.
4. Find the USB device in the list and right click its driver.
5. Select Update driver.

6. Click on – Search automatically for drivers.
7. Restart your computer and check if the error still persists or it is solved.
8. If it continues to occur then again open the Device Manager.
9. Right click on the device and select – Uninstall device.
10. Once more click on ‘Uninstall’.
11. Reboot the PC and the issue should be fixed.

You can investigate the reasons and factors – How to Configure System to Collect Memory Dump Files in Windows 11 or 10

Way-5: Make use of System File Checker and DISM Utilities

The most common and annoying reason for any BSOD is the corruption In system files that may eventuate due to old drivers, threats, conflict of 3rd party programs, and more. In addition, oftentimes broken .wim also triggers a bug check to occur.

2 utilities SFC and DISM are the best solutions for these flaws so you need to use them quickly –

1. Open the Command prompt with admin privileges as mentioned in Way-1.
2. Type – sfc /scannow.

3. Hit Enter and let the command complete its work.
4. Reboot the system and see if the blue screen error is rectified.
5. In any case, if the error still persists, run the following command –

DISM /Online /Cleanup-Image /RestoreHealth

6. This will simply repair the .wim file and solve the error.

Way-6: Run the Built-in Security tool

Threats and attacks might give rise to what failed: RNDISMP6.SYS Blue Screen error and system crash. These are also major reasons for the corruption in system files and registry and so to finish the BSOD you will have to wallop the malware and eliminate them.

Microsoft Defender is a pretty efficient tool to clean the computer removing infected files to get rid of DRIVER IRQL NOT LESS OR EQUAL RNDISMP6.SYS. Follow the method –

1. Press Windows+S.
2. Type – Windows security.
3. Hit Enter.
4. Select – Virus & threat protection.
5. Click on Scan options.
6. Check – Full Scan.
7. Finally, click on – Scan now.

8. After the scanning is completed go with the suggestions and clean the threats.

Way-7: Remove third-party antivirus or other programs

Third-party programs are often found to be culprit for blue screen error that can appear due to USB tethering in Windows 11 and 10. RNDISMP6.SYS Driver Irql Not Less Or Equal BSOD might turn out because of this hence move forward with the steps –

1. Right-click on the – Start.
2. Select – Run.
3. Type – appwiz.cpl.
4. Press Enter to open the Programs and Features window.
5. Choose Uninstall.

6. Follow the instructions from the screen until the completion of the removal.

Way-8: Detach the peripheral devices from BSOD and restart the computer.

Occasionally tricky things work when you are in a problem and this also resembles in this case of Blue screen error. Incompatible drivers of USB devices such as driver rndismp6.sys are the predictable components behind the occurrence of this issue on your computer.

To rescue this, simply remove the devices connected to USB ports and restart the system. When the error is fixed determine the peripheral and update its driver.

Methods:
Way-1: Run SFC, DISM, and dll registration commands at a time
Way-2: Use PowerShell Script
Way-3: Modify Registry
Way-4: Update the device driver
Way-5: Make use of System File Checker and DISM Utilities
Way-6: Run the Built-in Windows Defender
Way-7: Remove third-party antivirus or other programs
Way-8: Detach the peripheral devices from BSOD and restart the computer

That’s all!!